Smart Managed Gigabit Switches
DGS‑1210 Series
La serie DGS-1210 de Switches Gigabit Smart+ con Uplinks de Fibra se caracteriza por la integración de Administración avanzada junto con funciones de seguridad que entregan rendimiento y escalabilidad. Las opciones de administración para la serie incluye SNMP, Web Management, el utilitarion "D-Link Network Assistant" y lineas de comando compactas. También usa el Auto Voice VLAN desarrollado por D-Link para asegurar el ancho de banda y priorización necesarios para un buen rendimiento en redes de voz. Esta serie posee la tecnología D-Link Green 3.0, lo que le permite una alta eficiencia y ahorro en el uso de la energía ya que cumple con IEEE 802.3az (estándar para uso eficiente de Energía en Ethernet). Además soporta completamente los estándares de IPv6 y PoE (en los modelos con esta capacidad incluida).
Descargas
Puntos de ventaSoftware de gestión de red centralizada y remoto gratuito Nuclias Connect.
Descarga gratis nuestro software de gestión de red Nuclias Connect, diseñado para la gestión unificada de la red, el control, la seguridad y el escalado más versátil. Puede utilizarse como una plataforma de gestión de software local o como una solución en la nube para acceso remoto. Como alternativa, Nuclias Connect Hub (DNH-100) ofrece gestión de redes centralizada basada en el hardware.
Equipo compatible con

Características destacadas

Compact CLI via Telnet
Soporta Compact Command-Line Interface para gestión avanzada.

Static Routing
Enrute el tráfico de Layer 3 entre switches, incluso si están segmentados en VLAN.

Uplink Fibra óptica
Aumente las distancias de conexión con menos interferencias y mayor ancho de banda mediante fibra óptica.

Dual Software Images, Dual Config Files
Firmware upgrades y tests de configuración sin riesgos.

Interfaz de Videovigilancia CCTV
La exclusiva interfaz Surveillance de D-Link es fácil de usar y le ofrece una gestión más óptima de cámaras IP y grabadores de vídeo en red.
Gestión Smart con un Plus
Con más capacidad PoE, gestión avanzada de Capa 2 y funciones de Capa 3 como Static Routing, la gama de Switches Smart+ D‑Link DGS‑1210 proporciona la solución con mejor relación coste/eficiencia para el despliegue de redes gestionadas en cualquier entorno.

Conoce las Soluciones Smart de D‑Link
Esta serie ofrece un alto nivel de ahorro y eficiencia energética, ya que también cumple con el estándar IEEE 802.3az Energy Efficient Ethernet. La compatibilidad con la gestión y las configuraciones de IPv6 garantizan que su red siga protegida tras la actualización de IPv4 a IPv61. Al ofrecer múltiples opciones de gestión, los Smart Switches permiten un despliegue rápido, la ampliación de la infraestructura y la actualización de funciones sin problemas. Creados para pequeñas y medianas empresas, la serie DGS-1210 proporcionan funcionalidad, seguridad y capacidad de gestión por una fracción del costo de propiedad estándar.
Gestionable
La serie DGS-1210 Smart cuenta con una gestión de red avanzada a la que se puede acceder a través de la interfaz de usuario basada en la web y que equipa a su empresa con funciones de red como VLAN, protocolo de árbol de expansión (STP), agregación de enlaces y archivos de configuración duales.
Con potentes funciones de seguridad que incluyen IGMP snooping, listas de control de acceso y seguridad de puertos, la serie DGS-1210 es una solución versátil para entornos de red de acceso.

Uplinks de Fibra
Permiten una integración y gestión avanzada, con funciones extra de seguridad, mientras que aseguran el rendimiento y la escalabilidad necesarias para cualquier entorno empresarial.

PoE con potencia de hasta 193 W
La serie DGS-1210 dispone de varios switches con puertos PoE para alimentar por el cable de red LAN los dispositivos compatibles: cámaras IP de Videovigilancia, teléfonos, puntos de acceso, etc, lo que aumenta la sencillez y flexibilidad de instalación.

Fácil de implementar y administrar
El Asistente de red (DNA) gratuito de D-Link muestra todos los dispositivos conectados y acelera la configuración por primera vez. El sistema de administración de redes D-View 7 viene con una licencia gratuita para 25 nodos y 2 sondas y acceso completo a las herramientas de administración avanzada. Las licencias de actualización opcionales le permiten ampliar la gestión a más redes.
Ahorro de energía
Gracias al soporte del estándar IEEE 302.3az Energy Efficient Ethernet y de la tecnología D-Link Green 3.0.


Gestión dedicada de Videovigilancia CCTV
Opcionalmente puede seleccionar el modo Surveillance en la interfaz web para agregar de forma instantánea las cámaras y grabadores NVR, además de una interfaz más amigable para gestionar su topología de red CCTV. Detecta automáticamente sus dispositivos de seguridad y los segmenta en una VLAN dedicada para administrar el tráfico de videovigilancia de forma segura y eficiente.

DGS-1210-10
8x 10/100/1000BASE-T + 2 x 100/1000 Mbps SFP ports

DGS-1210-10P
8 10/100/1000BASE-T PoE + 2 100/1000 Mbps SFP ports

Especificaciones técnicas
General
DGS-1210-10
DGS-1210-10P
Hardware Version
• F1
Interface
•8x 10/100/1000BASE-T
• 2 x 100/1000 Mbps SFP ports
• 8 10/100/1000BASE-T PoE
• 2 100/1000 Mbps SFP ports
Port Standards
• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) • IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic
• IEEE 802.3az Energy Efficient Ethernet (EEE)
• IEEE 802.3x Flow Control
• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic
• IEEE 802.3az Energy Efficient Ethernet (EEE)
• IEEE 802.3x Flow Control
• IEEE 802.3af/at compliance (for PoE ports)
Network Cables
• UTP Cat. 5, Cat. 5e (100 m max.)
Duplex Mode
• Full/Half-duplex for 10/100 Mbps
• Full-duplex for 1000 Mbps
Media Interface Exchange
• Auto MDI/MDIX adjustment for all twisted-pair ports
Performance
DGS-1210-10
DGS-1210-10P
Switching Capacity
• 20 Gbps
Transmission Method
• Store-and-forward
MAC Address Table Size
• 8K Entries
Static MAC Addresses
• 256 entries
Maximum 64 Byte Packet Forwarding Rate
• 14.88 Mpps
Packet Buffer Memory
• 4.1 Mbits
CPU Memory
• DDR3 128 MB
Flash Memory
• 32 MB
PoE
PoECapablePorts
-- --
• Ports 1 to 8
Power Budget
-- --
• 65W
LEDs
Power (Per Device)
Link/Active/Speed (Per Port)
PWR Max
-- --
Software
L2 Features
• MACAddressTable
-8K entries
- 16K entries (DGS-1210-52/52MP only)
- IGMP Snooping
- IGMP v1/v2 Snooping
- IGMP v3 awareness
- Supports 256 IGMP groups
- Supports at least 64 static multicast addresses • IGMP per VLAN
- Supports IGMP Snooping Querier
• Loopback Detection
• 802.3ad Link Aggregation:
- DGS-1210-10/10P/10MP: Supports maximum 4 groups per device and 8 ports per group
- DGS-1210-20/26/28/28P/28MP: Supports maximum 8 groups per device and 8 ports per group
- DGS-1210-52/52MP: Supports max 16 groups per device and 8 ports per group
• LLDP
• LLDP-MED
• Jumbo Frame
Up to 10,000 bytes
• Spanning Tree Protocol
802.1D STP
802.1W RSTP
802.1s MSTP
• Flow Control
802.3x Flow Control
HOL Blocking Prevention
• Port Mirroring
One-to-One
Many-to-One
Supports Mirroring for Tx/Rx/Both
• Multicast Filtering
Forwards all unregistered groups
Filters all unregistered groups
• Configurable MDI/MDIX
MLD snooping v1/v2 (256 groups)
VLAN
• 802.1Q
• VLAN Group
Max. 256 static VLAN groups
• Configurable VID from 1 - 4094
• Asymmetric VLAN
• AutoVoice VLAN
Max. 10 user-defined OUI
Max. 8 default OUI
• Auto Surveillance VLAN
Quality of Service (QoS)
• 802.1p Quality of Service
• 8 queues per port
• Queue Handling
Strict
Weighted Round Robin (WRR)
• Bandwidth Control
Port-based (ingress/egress, min granularity 10/100/1000 is 16 Kbps)
• QoS based on:
802.1p priority queues
DSCP
MAC address
EtherType
IP address
Protocol type
ToS
IP preference
IPv6TrafficClass
TCP/UDP port
L3 Features
• IP interface
Supports 4 interfaces
• IPv6 Neighbor Discovery (ND)
• Static routing
124 IPv4 static route entries
50 IPv6 static route entries
Access Control List (ACL)
• Max. 50 access lists
• Max. 768 rules shared by IPv4, MAC, and IPv6
• Each rule can only be associated with a single port
• ACL based on:
- MAC address
802.1p priority mask
VID mask
Source/destination MAC address mask
EtherType mask
• IP address
Source/destination IP address mask
DSCP mask
Protocol type mask
TCP/UDP port number mask
• IPv6 address
Source/destination IP address mask
DSCP mask
Protocol type mask
TCP/UDP port number mask
IPv6 traffic class mask
Security Features
• Broadcast/Multicast/Unicast Storm Control
• D-Link Safeguard Engine
• Traffic segmentation
• SSH v2
• TLS v.1.2
• DoS attack prevention
• 802.1X Port-based Access Control
• Port Security
Supports up to 64 MAC addresses per port
• ARP Spoofing Prevention
Max. 127 entries
• DHCP Server Screening
• IP-MAC-Port Binding (Smart Binding)
- ARP Inspection
Max. 256 entries
- IPv4 Inspection
Max. 127 entries
- IPv6 Inspection
Max. 63 entries
- DHCP Snooping
Max. 512 entries
AAA
• 802.1X Authentication
Supports local/RADIUS database
Supports port-based access control
SupportsEAP,OTP,TLS,TTLS,PEAP
Max. 128 entries when using local database
• IPv6 RADIUS server
• Support MD5 authentication
Management
• Web-based GUI
• D-Link Network Assistant Utility
• Compact CLI
• Telnet Server
• TFTP Client
• Configurable MDI/MDIX
• SNMP
Supports v1/v2c/v3
• SNMPTrap
• Backup/upgrade firmware
• Smart Wizard
• Upload/download configuration file
• BootP/DHCP Client
• System Log
Max. 500 log entries
• SNTP
• ICMP v6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• Time setting
SNTP
• RMONv1
• Trusted host
• Dual image
• Dual configuration
OAM
• Cable diagnostics
• Factory reset
MIBs
• RFC1212 Concise MIB Definitions
• RFC1213 MIBII
• RFC1215 MIB Traps Convention
• RFC1493 Bridge MIB
• RFC1157, RFC2573, RFC2575, RFC2576 SNMP MIB
• RFC1442, RFC1901, RFC1902, RFC1903, RFC1904, RFC1905,
• RFC1906, RFC1907, RFC1908, RFC2578, RFC3418 SNMPv2 MIB
• RFC271, RFC1757, RFC2819 RMON MIB
• RFC2021 RMONv2 MIB
• RFC1398, RFC1643, RFC1650, RFC2358, RFC2665 Ether-like MIB
• RFC2674 802.1p MIB
• Interface Group MIB
• RFC2618 RADIUS Authentication Client MIB
• RFC4022 MIB for TCP
• RFC4113 MIB for UDP
• RFC2389 MIB for Diffserv.
• RFC2620 RADIUS Accounting Client MIB
• Private MIB
• PoE MIB
• DDP MIB
• LLDP-MED MIB
Green V3.0 Technology
• Power Saving by:
- Link Status
- Time-based PoE: PoE ports can be turned on/off by port or system through schedule
• System hibernation
• Port shut off
• Cable length detection
Management
• Web-based GUI
• D-Link Network Assistant Utility
• Compact CLI
• Telnet Server
• TFTP Client
• Configurable MDI/MDIX
• SNMP
Supports v1/v2c/v3
• SNMPTrap
• Backup/upgrade firmware
• Smart Wizard
• Upload/download configuration file
• BootP/DHCP Client
• System Log
Max. 500 log entries
• SNTP
• ICMP v6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• Time setting
SNTP
• RMONv1
• Trusted host
• Dual image
• Dual configuration
RFC Standards
• RFC791 IP
• RFC768 UDP
• RFC793 TCP
• RFC792 ICMPv4
• RFC2463, RFC4443 ICMPv6
• RFC826 ARP
• RFC1321, RFC2284, RFC2865, RFC2716, RFC3580 Extensible Authentication Protocol (EAP)
• RFC2573 SNMP Applications
• RFC2461, RFC4861 Neighbor Discovery for IPv6
• RFC2462, RFC4862 IPv6 Stateless Address Auto-configuration(SLAAC)
• RFC2464 IPv6 over Ethernet and definition
• RFC4291 IPv6 Addressing Architecture
• RFC2893, RFC4213 IPv4/IPv6 dual stack function
Optional SFP Transceivers
DGS-712
• 1000BASE-T copper
DEM-302S-LX
• 1000BASE-LX, single-mode, 2 km
DEM-302S-BXD/BXU
• Gigabit WDM transceiver, single-mode, 2 km
DEM-310GT
• 1000BASE-LX, single-mode, 10 km
DEM-311GT
• 1000BASE-SX, multi-mode, 550 m
DEM-312GT2
• 1000BASE-SX, multi-mode, 2 km
DEM-314GT
• 1000BASE-LHX, single-mode, 50 km
DEM-315GT
• 100BASE-ZX, single-mode, 80 km
DEM-330T/R
• Gigabit WDM transceiver, single-mode 10 km
DEM-331T/R
• Gigabit WDM transceiver, single-mode 40 km
DEM-210
• 100BASE-FX, single-mode, 15 km
DEM-211
• 100BASE-FX, multi-mode, 2 km
DEM-220T/R
• Fast Ethernet WDM transceiver, single-mode, 20 km
DGS-1210-26
26-ports Managed Switch: 24 10/100/1000 UTP + 2 100/1000 SFP ports

DGS-1210-28
28-ports Managed Switch: 24 10/100/1000 UTP + 4 100/1000 GbE/SFP combo ports

DGS-1210-52
52-ports Managed Switch: 48 10/100/1000 UTP + 4 100/1000 GbE/SFP combo ports

Especificaciones técnicas
General
DGS-1210-26
DGS-1210-28
DGS-1210-52
Hardware Version
• F1
Interface
• 24 x 10/100/1000BASE-T
• 2 x 100/1000 Mbps SFP ports
• 24 x 10/100/1000BASE-T
• 4 x 100/1000 Mbps GbE/SFP combo ports
• 48 x 10/100/1000BASE-T
• 4 x 100/1000 Mbps GbE/SFP combo ports
Port Standards
• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)
• IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic
• IEEE 802.3az Energy Efficient Ethernet (EEE)
• IEEE 802.3x Flow Control
Network Cables
• UTP Cat. 5, Cat. 5e (100 m max.)
Duplex Mode
• Full/Half-duplex for 10/100 Mbps
• Full-duplex for 1000 Mbps
Media Interface Exchange
• Auto MDI/MDIX adjustment for all twisted-pair ports
Performance
DGS-1210-26
DGS-1210-28
DGS-1210-52
Switching Capacity
• 52 Gbps
• 56 Gbps
• 104 Gbps
Transmission Method
• Store-and-forward
MAC Address Table Size
• 8K Entries
Static MAC Addresses
• 256 entries
Maximum 64 Byte Packet Forwarding Rate
• 38.7 Mpps
• 41.7 Mpps
• 77.4 Mpps
Packet Buffer Memory
• 4.1 Mbits
• 4.1 Mbits
• 12 Mbits
CPU Memory
• DDR3 128 MB
Flash Memory
• 32 MB
LEDs
Power (Per Device)
Link/Active/Speed (Per Port)
Software
L2 Features
• MACAddressTable
8K entries
16K entries (DGS-1210-52/52MP only)
• IGMP Snooping
IGMP v1/v2 Snooping
IGMP v3 awareness
Supports 256 IGMP groups
Supports at least 64 static multicast addresses
IGMP per VLAN
Supports IGMP Snooping Querier
• Loopback Detection
• 802.3ad Link Aggregation:
DGS-1210-10/10P/10MP: Supports maximum 4 groups per device and 8 ports per group
DGS-1210-20/26/28/28P/28MP: Supports maximum 8 groups per device and 8 ports per group
DGS-1210-52/52MP: Supports max 16 groups per device and 8 ports per group
• LLDP
• LLDP-MED
• Jumbo Frame
Up to 10,000 bytes
• Spanning Tree Protocol
802.1D STP
802.1W RSTP
802.1s MSTP
• Flow Control
802.3x Flow Control
HOL Blocking Prevention
• Port Mirroring
One-to-One
Many-to-One
Supports Mirroring for Tx/Rx/Both
• Multicast Filtering
Forwards all unregistered groups
Filters all unregistered groups
• Configurable MDI/MDIX
MLD snooping v1/v2 (256 groups)
VLAN
• 802.1Q
• VLAN Group
Max. 256 static VLAN groups
• Configurable VID from 1 - 4094
• Asymmetric VLAN
• AutoVoice VLAN
Max. 10 user-defined OUI
Max. 8 default OUI
• Auto Surveillance VLAN
Quality of Service (QoS)
• 802.1p Quality of Service • 8 queues per port
• Queue Handling
Strict
Weighted Round Robin (WRR)
• Bandwidth Control
Port-based (ingress/egress, min granularity 10/100/1000 is 16 Kbps)
• QoS based on:
802.1p priority queues • DSCP
MAC address
EtherType
IP address
Protocol type
ToS
IP preference
IPv6TrafficClass
TCP/UDP port
L3 Features
• IP interface
Supports 4 interfaces
• IPv6 Neighbor Discovery (ND)
• Static routing
124 IPv4 static route entries
50 IPv6 static route entries
Access Control List (ACL)
• Max. 50 access lists
• Max. 768 rules shared by IPv4, MAC, and IPv6
• Each rule can only be associated with a single port
• ACL based on:
• MAC address
802.1p priority mask
VID mask
Source/destination MAC address mask
EtherType mask
• IP address
Source/destination IP address mask
DSCP mask
Protocol type mask
TCP/UDP port number mask
• IPv6 address
Source/destination IP address mask
DSCP mask
Protocol type mask
TCP/UDP port number mask
IPv6 traffic class mask
Security Features
• Broadcast/Multicast/Unicast Storm Control
• D-Link Safeguard Engine
• Traffic segmentation
• SSH v2
• TLS v.1.2
• DoS attack prevention
• 802.1X Port-based Access Control
• Port Security
Supports up to 64 MAC addresses per port
• ARP Spoofing Prevention
Max. 127 entries
• DHCP Server Screening
• IP-MAC-Port Binding (Smart Binding)
• ARP Inspection
Max. 256 entries
• IPv4 Inspection
Max. 127 entries
• IPv6 Inspection
Max. 63 entries
• DHCP Snooping
Max. 512 entries
AAA
• 802.1X Authentication
Supports local/RADIUS database
Supports port-based access control
SupportsEAP,OTP,TLS,TTLS,PEAP
Max. 128 entries when using local database
• IPv6 RADIUS server
• Support MD5 authentication
Management
• Web-based GUI
• D-Link Network Assistant Utility
• Compact CLI
• Telnet Server
• TFTP Client
• Configurable MDI/MDIX
• SNMP
Supports v1/v2c/v3
• SNMPTrap
• Backup/upgrade firmware
• Smart Wizard
• Upload/download configuration file
• BootP/DHCP Client
• System Log
Max. 500 log entries
• SNTP
• ICMP v6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• Time setting
SNTP
• RMONv1
• Trusted host
• Dual image
• Dual configuration
OAM
• Cable diagnostics
• Factory reset
MIBs
• RFC1212 Concise MIB Definitions
• RFC1213 MIBII
• RFC1215 MIB Traps Convention
• RFC1493 Bridge MIB
• RFC1157, RFC2573, RFC2575, RFC2576 SNMP MIB
• RFC1442, RFC1901, RFC1902, RFC1903, RFC1904, RFC1905,
• RFC1906, RFC1907, RFC1908, RFC2578, RFC3418 SNMPv2 MIB
• RFC271, RFC1757, RFC2819 RMON MIB
• RFC2021 RMONv2 MIB
• RFC1398, RFC1643, RFC1650, RFC2358, RFC2665 Ether-like MIB
• RFC2674 802.1p MIB
• Interface Group MIB
• RFC2618 RADIUS Authentication Client MIB
• RFC4022 MIB for TCP
• RFC4113 MIB for UDP
• RFC2389 MIB for Diffserv.
• RFC2620 RADIUS Accounting Client MIB
• Private MIB
• PoE MIB
• DDP MIB
• LLDP-MED MIB
Green V3.0 Technology
• Power Saving by:
- Link Status
- Time-based PoE: PoE ports can be turned on/off by port or system through schedule
• System hibernation
• Port shut off
• Cable length detection
Management
• Web-based GUI
• D-Link Network Assistant Utility
• Compact CLI
• Telnet Server
• TFTP Client
• Configurable MDI/MDIX
• SNMP
Supports v1/v2c/v3
• SNMPTrap
• Backup/upgrade firmware
• Smart Wizard
• Upload/download configuration file
• BootP/DHCP Client
• System Log
Max. 500 log entries
• SNTP
• ICMP v6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• Time setting
SNTP
• RMONv1
• Trusted host
• Dual image
• Dual configuration
RFC Standards
• RFC791 IP
• RFC768 UDP
• RFC793 TCP
• RFC792 ICMPv4
• RFC2463, RFC4443 ICMPv6
• RFC826 ARP
• RFC1321, RFC2284, RFC2865, RFC2716, RFC3580 Extensible
Authentication Protocol (EAP)
• RFC2573 SNMP Applications
• RFC2461, RFC4861 Neighbor Discovery for IPv6
• RFC2462, RFC4862 IPv6 Stateless Address Auto-configuration
(SLAAC)
• RFC2464 IPv6 over Ethernet and definition
• RFC4291 IPv6 Addressing Architecture
• RFC2893, RFC4213 IPv4/IPv6 dual stack function
Optional SFP Transceivers
DGS-712
• 1000BASE-T copper
DEM-302S-LX
• 1000BASE-LX, single-mode, 2 km
DEM-302S-BXD/BXU
• Gigabit WDM transceiver, single-mode, 2 km
DEM-310GT
• 1000BASE-LX, single-mode, 10 km
DEM-311GT
• 1000BASE-SX, multi-mode, 550 m
DEM-312GT2
• 1000BASE-SX, multi-mode, 2 km
DEM-314GT
• 1000BASE-LHX, single-mode, 50 km
DEM-315GT
• 100BASE-ZX, single-mode, 80 km
DEM-330T/R
• Gigabit WDM transceiver, single-mode 10 km
DEM-331T/R
• Gigabit WDM transceiver, single-mode 40 km
DEM-210
• 100BASE-FX, single-mode, 15 km
DEM-211
• 100BASE-FX, multi-mode, 2 km
DEM-220T/R
• Fast Ethernet WDM transceiver, single-mode, 20 km
DGS-1210-28P
28-ports Managed PoE Switch: 24 10/100/1000 PoE UTP + 4 100/1000 GbE/SFP combo ports

DGS-1210-28MP
28-ports Managed PoE Switch: 24 10/100/1000 PoE UTP + 4 100/1000 GbE/SFP combo ports

DGS-1210-52MP
52-ports Managed PoE Switch: 48 10/100/1000 PoE UTP + 4 100/1000 GbE/SFP combo ports
