DXS-1210-Slider1
DXS-1210-Slider2
DXS1210-slider2
DXS1210-slider3
DXS1210-slider4
DXS-1210-Slider5
DXS1210-slider6
DXS1210-slider7
DXS-1210-Slider3
DXS-1210-Slider4
DXS1210-slider5
DXS-1210-Slider1 DXS-1210-Slider2 DXS1210-slider2 DXS1210-slider3 DXS1210-slider4 DXS-1210-Slider5 DXS1210-slider6 DXS1210-slider7 DXS-1210-Slider3 DXS-1210-Slider4 DXS1210-slider5

Switches 10 Gigabit Smart Managed

DXS‑1210 Series

  • Conexiones de ancho de banda de 10GbE
  • 4 x puertos 10/25G SFP28¹ (DXS-1210-28T)
  • Administración de Layer 2 con funciones de Layer 3 Lite
  • Interfaz gráfica de usuario (GUI) basada en web, puerto de consola, Full CLI
  • Static Routing y MSTP

Puntos de venta

Características destacadas

DXS1210_Icon_10G

Puertos Ethernet de 10 GbE

Conexiones 10G. Compatibilidad con los cables RJ-45 estándar existentes.

DXS1210_Icon_Management

GUI de tipo Web

La interfaz de administración remota intuitiva facilita la configuración y la configuración y reduce los tiempos de implementación de los switches

DXS1210_Icon_L2

Gestión de capa 2

Incluye duplicación de puertos, Protocolo de árbol de expansión (STP) y Protocolo de control de agregación de enlaces (LACP).

DXS1210_Icon_L3

Características de Layer 3 Lite

Tales como interfaces IP, ARP, IPv6 Neighbor Discovery (ND), Default Routing y Static Routing.

DXS1210_Icon_Energy

Tecnología de ahorro de energía

Apaga cualquier puerto no utilizado, e incluye apagado de LED, apagado de puerto, puerto en espera.

DXS1210_Icon_QOS

Calidad de Servicio (QoS) y Agregación de enlaces

Numerosos controles de calidad de servicio, incluido el control del ancho de banda y la VLAN de vigilancia automática.

DXS1210_Icon_Security

Seguridad de red

Safeguard Engine™ de D-Link ayuda a proteger contra ataques maliciosos.

Capacidades 10G al alcance de cualquier tipo de empresa.

Añada conectividad Ethernet de 10 Gigabit con estos switches de excelente relación coste/prestaciones Diseñado para funcionar como núcleo de red para pequeñas y medianas empresas (PYMES) o como switch de agregación o concentradora 10 GbE.

Amplias funciones de Layer 2 y Layer 3 Lite.

La gama DXS-1210 incluye características de la capa 2, como la duplicación de puertos, el protocolo Spanning Tree (STP) y el protocolo Link Aggregation Control (LACP). También admiten interfaces IP, ARP, IPv6 Neighbor Discovery (ND), enrutamiento predeterminado, enrutamiento estático IPv4/IPv6, IGMP Snooping y MLD Snooping, VLAN automática de voz y vigilancia, LLDP y LLDP-MED.

Rendimiento de red mejorado

El enrutamiento inter-VLAN permite enrutar el tráfico entre VLAN sin pasar por el enrutador, reduciendo la carga del enrutador y de las redes troncales.

Controles de seguridad y QoS para prioridades

Controles de seguridad para la protección de la red, y QoS asegura que el tráfico esencial llegue a su destino.

Apilamiento SFP+ 10G

La gama DXS‑1210 incluye la utilidad D‑Link Network Assistant (DNA), que simplifica la detección de dispositivos que utilizan el protocolo D‑Link Discovery dentro del mismo segmento de red L2 y los muestra en pantalla para un acceso instantáneo. Las configuraciones simultáneas y las configuraciones básicas de todos los dispositivos descubiertos, incluidos los cambios de contraseña y las actualizaciones de firmware, pueden realizarse fácilmente.

La gama DXS‑1210 también admite una interfaz completa de línea de comandos Telnet Full Command CLI y D‑View 7, un sistema de gestión de red (NMS) que permite la gestión centralizada de las características críticas de la red, como disponibilidad, fiabilidad, resistencia y seguridad.

Gestione la red con nuestro software gratuito D‑View 7

Software de gestión de red fácil de usar

Supervise el estado de la red en tiempo real, configure prácticamente cualquier dispositivo siempre que sea compatible con SNMP, pruebe la red con los 25 nodos y 2 sondas incluidos (se pueden adquirir licencias adicionales para aumentar el número de nodos y sondas), y mucho más.

Informes y resolución de problemas

Proporciona alertas e historial de red, y proporciona acceso rápido a la configuración de los switches.

Mantenimiento y características avanzadas

Actualice el firmware en varios dispositivos de forma simultánea o individual, y programe las tareas de mantenimiento para las horas de menor consumo

Integración perfecta

La gama DXS-1210 incorpora puertos RJ45 y SFP+ capaces de conectarse a Cat. 6 y fibra para Ethernet 10G. Esto significa que la gama DXS-1210 puede proporcionar una solución flexible para conexiones de servidores de entrada y salida, lo que facilita el despliegue de la red.

Seguridad en todos los puertos.

El innovador motor de protección D-Link Safeguard Engine protege los switches contra las intrusiones de tráfico causadas por ataques maliciosos y aumenta la fiabilidad general de la red.

Estos switches también cuentan con la prevención de spoofing del protocolo de resolución de direcciones (ARP), que protege aún más la red de los ataques cibernéticos. También utilizan ACL de control de paquetes para bloquear paquetes no válidos que contienen mensajes ARP falsos.

La Lista de control de acceso (ACL) ayuda a proteger la red interna de TI mediante el acceso a la red basado en permisos.

La función de pantalla del servidor DHCPfiltra las respuestas DHCP en puertos no autorizados para evitar que se les asigne una dirección IP.

Además, la compatibilidad con la autenticación basada en puerto y host 802.1X permite que la red se autentique a través de servidores RADIUS externos.

QoS y control de ancho de banda para las prioridades de la red.

La gama DXS‑1210 es compatible con Auto Surveillance VLAN (ASV) y Auto Voice VLAN, ara realizar implementaciones más versátiles de VoIP y videovigilancia.

AutoSurveillance VLAN

Detecta y asigna automáticamente el tráfico de videovigilancia a una VLAN de alta prioridad mediante la creación de distintos dominios de difusión para garantizar la transferencia de vídeo de calidad en tiempo real.

Auto Voice VLAN

Mejora el servicio de VoIP al colocar automáticamente el tráfico de voz de los teléfonos IP a una VLAN designada. Con una VLAN priorizada y segmentada, esta característica garantiza la calidad y seguridad del tráfico VoIP.

Como resultado, los paquetes de voz y vídeo tienen prioridad sobre otros paquetes. Y con el control de ancho de banda, se puede reservar más ancho de banda para funciones importantes.

Eficiencia energética, sin sacrificios.

Con la tecnología D-Link Green incluida, esta gama ahorra energía sin pérdida de rendimiento operativo ni de funcionalidad.

Ventiladores de ajuste automático con sensores de calor

Los ventiladores inteligentes incorporados con sensores de calor internos controlan y detectan los cambios de temperatura y reaccionan utilizando diferentes velocidades de ventilador para mantener los sistemas a una temperatura óptima.

Modo de reposo

El estado del enlace reduce drásticamente el consumo de energía al poner automáticamente los puertos sin enlace en modo de espera.

Chipset avanzado

Utiliza tecnología de silicio para hacer más eficiente el uso de la energía

DGS-1520-28

24 x 10/100/1000Base-TPorts + 2 x 10GBase-T Ports + 2 x 10G SFP+ Ports

DGS-1520-28MP

20 x 10/100/1000Base-TPoE Ports + 4 x 2.5GBase-T PoE Ports + 2 x 10GBase-T Ports + 2 x 10G SFP+ Ports

Especificaciones técnicas

General

DGS-1520-28

DGS-1520-28MP

Hardware Version

• A1

Size

• 19” standard rack width, 1U height

Interfaces

• 24 x 10/100/1000Base-T Ports
• 2 x 10GBase-T Ports
• 2 x 10G SFP+ Ports

• 20 x 10/100/1000Base-T PoE Ports
• 4 x 2.5GBase-T PoE Ports
• 2 x 10GBase-T Ports
• 2 x 10G SFP+ Ports

Standards

• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic
• IEEE 802.3az Energy-Efficient Ethernet (EEE)
• IEEE 802.3x Flow Control
• IEEE 802.3ae 10 Gigabit Ethernet
• IEEE 802.3af/at
• IEEE 802.3bz

Media Interface Exchange

• Auto or configurable MDI/MDIX

LED

• Power/Stacking ID/Fan (per device)
• Link/Activity/Speed (per 10/100/1000 Mbps port, per 2.5G PoE port, per Gigabit SFP port, per 10G SFP+ port)

Functionality

DGS-1520-28

DGS-1520-28MP

Switching Capacity

• 128 Gbps

• 140 Gbps

Transmission Method

• Store-and-forward

MAC Address Table

• Up to 16,384 entries per device

Static MAC Addresses

• Up to 512 static MAC entries

Maximum Forwarding Rate

• 95.24 Mpps

• 104.16 Mpps

PoE Standard

• N/A

• IEEE802.3at
• IEEE802.3af

PoE Power Budget

• N/A

• 370 W
• 740 W (with RPS)

Software

Stackability

Physical stacking
• 10GBase-T and SFP+
• Up to 8 units per stack
• Up to 80 Gbps stacking bandwidth
• Ring/chain topology support

Virtual stacking
• D-Link Single IP Management (SIM)
• Up to 32 units per virtual stack

L2 Features

MAC Address Table: 16,384 entries
Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
Jumbo Frames up to 12,288 Bytes
802.1AX/802.3ad Link Aggregation
• Max. 32 groups per device, 8 ports per group
Spanning Tree Protocols
• 802.1D STP
• 802.1w RSTP
• 802.1s MSTP
• BPDU Filtering
• Root Guard
• Loop Guard

Loopback Detection
Port Mirroring
• Supports One-to-One, Many-to-One
• Supports Mirroring for both Tx/Rx
• Supports 4 mirroring groups
Flow mirroring
• Supports Ingress Mirroring only
VLAN Mirroring
RSPAN
L2 Protocol Tunneling
Ethernet Ring Protection Switching (ERPS) v1/v2

L2 Multicasting

IGMP Snooping
• IGMP v1/v2/v3 Snooping
• Supports 512 IGMP groups
• Host-based IGMP Snooping Fast Leave
• Supports 128 static IGMP groups
• Per VLAN IGMP Snooping
• Data Driven Learning
• IGMP Snooping Querier
• Report Suppression

MLD Snooping
• MLD v1/v2 Snooping
• Support 256 MLD Groups
• Host-based MLD Snooping Fast Leave
• Supports 64 static MLD groups
• MLD Snooping Querier
• Per VLAN MLD Snooping
• MLD Proxy Reporting

VLAN

VLAN Group
• Max. 4K VLAN groups
• Max. 1~4094 VIDs
GVRP
• Max. 4K dynamic VLAN groups
Double VLAN (Q-in-Q)
• Port-based Q-in-Q
Selective Q-in-Q
802.1Q
Auto Surveillance VLAN
Port-based VLAN

802.1v Protocol-based VLAN
Voice VLAN
MAC-based VLAN
Subnet-based VLAN
VLAN translation
Multicast VLAN (ISM VLAN for IPv4/IPv6)
Asymmetric VLAN
Private VLAN
VLAN Trunking
Super VLAN

L3 Features

IPv4 ARP Entries: 8192
• 256 Static ARP
IPv6 ND Entries:4096
• 128 Static ND Entries
IP Interface
• Supports 16 interfaces

Gratuitous ARP
Loopback Interface
Proxy ARP
• Support local ARP proxy
VRRP v2/v3
IP Helper

L3 Routing

Supports 1024 hardware routing
entries shared by IPv4/IPv6
• 1 entry consumed by each IPv4 route
• 2 entries consumed by each IPv6 route
Supports up to 4096 hardware L3
forwarding entries shared by IPv4/IPv6
• 1 entry consumed by each IPv4 route
• 2 entries consumed by each IPv6 route
IPv4/IPv6 Static Route
• Max. 512 IPv4 entries
• Max. 256 IPv6 entries
Equal-Cost Multi-Path Route (ECMP)
Weighted-Cost Multi-Path Route (WCMP)

IPv4/IPv6 Default Route
Policy-based Route (PBR)
Null Route
Route Preference
Route Redistribution
RIPv1/v2/ng
OSPF
• OSPF v2/v3
• OSPF passive interface
• Stub/NSSA area
• Supports Equal-Cost Multi-Path Route (ECMP)
• Text/MD5 authentication

L3 Multicasting

IGMP v1/v2/v3
IGMP Proxy
MLD v1/v2
MLD proxy

DVMRP v3
PIM Sparse-Dense Mode (PIM-SDM)
PIM-SM/DM/SSM for IPv4/IPv6

QoS (Quality of Service)

802.1p
8 queues per port
Queue Handling
• Strict Priority
• Weighted Round Robin (WRR)
• Strict + WRR
• Weighted Deficit Round Robin (WDRR)
Congestion Control
• Weighted Random Early Detection (WRED)
• 802.1Qbb Priority-based Flow
Control (PFC) [10G ports only]
Policy Map
• Remark 802.1p priority
• Remark IP precedence/DSCP
• Rate limiting
• Time based QoS
CoS based on
• Switch port
• Inner/Outer VID

• Inner/Outer 802.1p Priority
• MAC address
• Ether type
• IP address
• DSCP
• ToS/IP preference
• Protocol type
• TCP/UDP port
• IPv6 traffic class
• IPv6 flow label
Bandwidth Control
• Port-based (ingress/egress,
min. granularity 8 Kbps)
• Flow-based (ingress/egress,
min. granularity 8 Kbps)
• Per queue bandwidth control
(min. granularity 8 Kb/s)
Three Color Marker
• CIR/PIR minimum granularity: 8 kbps
• trTCM
• srTCM

Access Control List (ACL)

ACL based on
• 802.1p priority
• VID
• MAC address
• Ether Type
• LLC
• VLAN
• IP address
• IP preference/ToS
• DSCP mask

• Protocol type
• TCP/UDP port number
• IPv6 Traffic Class
• IPv6 Flow Label
Time-based ACL
CPU Interface Filtering
Max. ACL entries:
• Ingress (hardware entries): 1536
• Egress (hardware entries): 512
• VLAN Access Map Numbers: 2048

Security

Port Security
• Supports up to 64 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
D-Link Safeguard Engine
DHCP Server Screening
IP Source Guard
DHCP Snooping
IPv6 Snooping
Dynamic ARP Inspection (DAI)
DHCPv6 Guard
IPv6 Route Advertisement (RA) Guard
IPv6 ND Inspection
Duplicate Address Detection (DAD)

ARP Spoofing Prevention
• Max. 64 entries
L3 Control Packet Filtering
Unicast Reverse Path Forwarding (URPF)
Traffic Segmentation
SSL
• Supports TLS 1.0/1.1/1.2
• Supports IPv4/IPv6 access
SSH
• Supports SSH v2
• Supports IPv4/IPv6 access
BPDU Attack Protection
DOS Attack Prevention

AAA

Guest VLAN
802.1X Authentication
• Supports port/host-based access control
• Identity-driven Policy Assignment
• Dynamic VLAN Assignment
Web-based Access Control (WAC)
• Supports port/host-based access control
• Identity-driven Policy Assignment
• Dynamic VLAN Assignment

MAC-based Access Control (MAC)
• Supports port/host-based access control
• Identity-driven Policy Assignment
• Dynamic VLAN Assignment
RADIUS and TACACS+ Authentication
Authentication Database Failover
Compound Authentication
Privilege Level for Management Access
Trusted Host
RADIUS/TACACS+ Accounting

Green Features

Energy-Efficient Ethernet (EEE)
Power saving by link status
Power saving by LED shut-off

Power saving by port shut-off
Power saving by system hibernation
Time-based PoE (PoE models only)

Operation, Administration and Maintenance (OAM)

Cable Diagnostics
Optical Transceiver Digital Diagnostic
Monitoring (DDM)

Management

Web-based GUI
• Support IPv4/IPv6 access
• Support SSL (HTTPS)
Command Line Interface (CLI)
Telnet Server/Client for IPv4/IPv6
TFTP Client for IPv4/IPv6
DNS Client for IPv4/IPv6
Secure FTP Server/Client for IPv4/IPv6
SNMP
• Support v1/v2c/v3
• Support for IPv4/IPv6 access
SNMP Traps
System Log for IPv4/IPv6 Syslog Server
sFlow
Multiple Images & Configurations
RMON v1:
• Supports 1,2,3,9 groups
RMON v2:
• Supports ProbeConfig group
LLDP/LLDP-MED

BootP/DHCP Client
DHCP Auto-Configuration/Auto Image
DHCP/DHCPv6 Local Relay
DHCP Relay Option 60/61/62/125
Flash File System
D-Link Discover Protocol (DDP)
Debug command
Support IPv4/v6 SNTP Server
NTPv3/v4
Password recovery/encryption
DHCP server
• Support for IPv4/IPv6 address assignment
Command Logging
SMTP
DHCPv6 Prefix Delegation (PD)
Ping/ Traceroute for IPv4/IPv6
Microsoft® Network Load Balancing (NLB)
PD Alive (PoE Models Only)
Zero Touch Provisioning (ZTP)

DGS-1520-52

48 x 10/100/1000Base-T Ports + 2 x 10GBase-T Ports + 2 x 10G SFP+ Ports

DGS-1520-52MP

44 x 10/100/1000Base-T PoE + 4 x 2.5GBase-T PoE Ports + 2 x 10GBase-T Ports + 2 x 10G SFP+ Ports

Especificaciones técnicas

General

DGS-1520-52

DGS-1520-52MP

Hardware Version

• A1

Size

• 19” standard rack width, 1U height

Interfaces

• 48 x 10/100/1000Base-T Ports
• 2 x 10GBase-T Ports
• 2 x 10G SFP+ Ports

• 44 x 10/100/1000Base-T PoE
• 4 x 2.5GBase-T PoE Ports
• 2 x 10GBase-T Ports
• 2 x 10G SFP+ Ports

Standards

• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic
• IEEE 802.3az Energy-Efficient Ethernet (EEE)
• IEEE 802.3x Flow Control
• IEEE 802.3ae 10 Gigabit Ethernet
• IEEE 802.3af/at
• IEEE 802.3bz

Media Interface Exchange

• Auto or configurable MDI/MDIX

LED

• Power/Stacking ID/Fan (per device)
• Link/Activity/Speed (per 10/100/1000 Mbps port, per 2.5G PoE port, per Gigabit SFP port, per 10G SFP+ port)

Functionality

DGS-1520-52

DGS-1520-52MP

Switching Capacity

• 176 Gbps

• 188 Gbps

Transmission Method

• Store-and-forward

MAC Address Table

• Up to 16,384 entries per device

Static MAC Addresses

• Up to 512 static MAC entries

Maximum Forwarding Rate

• 130.95 Mpps

• 139.88 Mpps

PoE Standard

• N/A

• IIEEE802.3at
• IEEE802.3af

PoE Power Budget

• N/A

• 370 W
• 740 W (with RPS)

Software

Stackability

Physical stacking
• 10GBase-T and SFP+
• Up to 8 units per stack
• Up to 80 Gbps stacking bandwidth
• Ring/chain topology support

Virtual stacking
• D-Link Single IP Management (SIM)
• Up to 32 units per virtual stack

L2 Features

MAC Address Table: 16,384 entries
Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
Jumbo Frames up to 12,288 Bytes
802.1AX/802.3ad Link Aggregation
• Max. 32 groups per device, 8 ports per group
Spanning Tree Protocols
• 802.1D STP
• 802.1w RSTP
• 802.1s MSTP
• BPDU Filtering
• Root Guard
• Loop Guard

Loopback Detection
Port Mirroring
• Supports One-to-One, Many-to-One
• Supports Mirroring for both Tx/Rx
• Supports 4 mirroring groups
Flow mirroring
• Supports Ingress Mirroring only
VLAN Mirroring
RSPAN
L2 Protocol Tunneling
Ethernet Ring Protection Switching (ERPS) v1/v2

L2 Multicasting

IGMP Snooping
• IGMP v1/v2/v3 Snooping
• Supports 512 IGMP groups
• Host-based IGMP Snooping Fast Leave
• Supports 128 static IGMP groups
• Per VLAN IGMP Snooping
• Data Driven Learning
• IGMP Snooping Querier
• Report Suppression

MLD Snooping
• MLD v1/v2 Snooping
• Support 256 MLD Groups
• Host-based MLD Snooping Fast Leave
• Supports 64 static MLD groups
• MLD Snooping Querier
• Per VLAN MLD Snooping
• MLD Proxy Reporting

VLAN

VLAN Group
• Max. 4K VLAN groups
• Max. 1~4094 VIDs
GVRP
• Max. 4K dynamic VLAN groups
Double VLAN (Q-in-Q)
• Port-based Q-in-Q
Selective Q-in-Q
802.1Q
Auto Surveillance VLAN
Port-based VLAN

802.1v Protocol-based VLAN
Voice VLAN
MAC-based VLAN
Subnet-based VLAN
VLAN translation
Multicast VLAN (ISM VLAN for IPv4/IPv6)
Asymmetric VLAN
Private VLAN
VLAN Trunking
Super VLAN

L3 Features

IPv4 ARP Entries: 8192
• 256 Static ARP
IPv6 ND Entries:4096
• 128 Static ND Entries
IP Interface
• Supports 16 interfaces

Gratuitous ARP
Loopback Interface
Proxy ARP
• Support local ARP proxy
VRRP v2/v3
IP Helper

L3 Routing

Supports 1024 hardware routing
entries shared by IPv4/IPv6
• 1 entry consumed by each IPv4 route
• 2 entries consumed by each IPv6 route
Supports up to 4096 hardware L3
forwarding entries shared by IPv4/IPv6
• 1 entry consumed by each IPv4 route
• 2 entries consumed by each IPv6 route
IPv4/IPv6 Static Route
• Max. 512 IPv4 entries
• Max. 256 IPv6 entries
Equal-Cost Multi-Path Route (ECMP)
Weighted-Cost Multi-Path Route (WCMP)

IPv4/IPv6 Default Route
Policy-based Route (PBR)
Null Route
Route Preference
Route Redistribution
RIPv1/v2/ng
OSPF
• OSPF v2/v3
• OSPF passive interface
• Stub/NSSA area
• Supports Equal-Cost Multi-Path Route (ECMP)
• Text/MD5 authentication

L3 Multicasting

IGMP v1/v2/v3
IGMP Proxy
MLD v1/v2
MLD proxy

DVMRP v3
PIM Sparse-Dense Mode (PIM-SDM)
PIM-SM/DM/SSM for IPv4/IPv6

QoS (Quality of Service)

802.1p
8 queues per port
Queue Handling
• Strict Priority
• Weighted Round Robin (WRR)
• Strict + WRR
• Weighted Deficit Round Robin (WDRR)
Congestion Control
• Weighted Random Early Detection (WRED)
• 802.1Qbb Priority-based Flow
Control (PFC) [10G ports only]
Policy Map
• Remark 802.1p priority
• Remark IP precedence/DSCP
• Rate limiting
• Time based QoS
CoS based on
• Switch port
• Inner/Outer VID

• Inner/Outer 802.1p Priority
• MAC address
• Ether type
• IP address
• DSCP
• ToS/IP preference
• Protocol type
• TCP/UDP port
• IPv6 traffic class
• IPv6 flow label
Bandwidth Control
• Port-based (ingress/egress,
min. granularity 8 Kbps)
• Flow-based (ingress/egress,
min. granularity 8 Kbps)
• Per queue bandwidth control
(min. granularity 8 Kb/s)
Three Color Marker
• CIR/PIR minimum granularity: 8 kbps
• trTCM
• srTCM

Access Control List (ACL)

ACL based on
• 802.1p priority
• VID
• MAC address
• Ether Type
• LLC
• VLAN
• IP address
• IP preference/ToS
• DSCP mask

• Protocol type
• TCP/UDP port number
• IPv6 Traffic Class
• IPv6 Flow Label
Time-based ACL
CPU Interface Filtering
Max. ACL entries:
• Ingress (hardware entries): 1536
• Egress (hardware entries): 512
• VLAN Access Map Numbers: 2048

Security

Port Security
• Supports up to 64 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
D-Link Safeguard Engine
DHCP Server Screening
IP Source Guard
DHCP Snooping
IPv6 Snooping
Dynamic ARP Inspection (DAI)
DHCPv6 Guard
IPv6 Route Advertisement (RA) Guard
IPv6 ND Inspection
Duplicate Address Detection (DAD)

ARP Spoofing Prevention
• Max. 64 entries
L3 Control Packet Filtering
Unicast Reverse Path Forwarding (URPF)
Traffic Segmentation
SSL
• Supports TLS 1.0/1.1/1.2
• Supports IPv4/IPv6 access
SSH
• Supports SSH v2
• Supports IPv4/IPv6 access
BPDU Attack Protection
DOS Attack Prevention

AAA

Guest VLAN
802.1X Authentication
• Supports port/host-based access control
• Identity-driven Policy Assignment
• Dynamic VLAN Assignment
Web-based Access Control (WAC)
• Supports port/host-based access control
• Identity-driven Policy Assignment
• Dynamic VLAN Assignment

MAC-based Access Control (MAC)
• Supports port/host-based access control
• Identity-driven Policy Assignment
• Dynamic VLAN Assignment
RADIUS and TACACS+ Authentication
Authentication Database Failover
Compound Authentication
Privilege Level for Management Access
Trusted Host
RADIUS/TACACS+ Accounting

Green Features

Energy-Efficient Ethernet (EEE)
Power saving by link status
Power saving by LED shut-off

Power saving by port shut-off
Power saving by system hibernation
Time-based PoE (PoE models only)

Operation, Administration and Maintenance (OAM)

Cable Diagnostics
Optical Transceiver Digital Diagnostic
Monitoring (DDM)

Management

Web-based GUI
• Support IPv4/IPv6 access
• Support SSL (HTTPS)
Command Line Interface (CLI)
Telnet Server/Client for IPv4/IPv6
TFTP Client for IPv4/IPv6
DNS Client for IPv4/IPv6
Secure FTP Server/Client for IPv4/IPv6
SNMP
• Support v1/v2c/v3
• Support for IPv4/IPv6 access
SNMP Traps
System Log for IPv4/IPv6 Syslog Server
sFlow
Multiple Images & Configurations
RMON v1:
• Supports 1,2,3,9 groups
RMON v2:
• Supports ProbeConfig group
LLDP/LLDP-MED

BootP/DHCP Client
DHCP Auto-Configuration/Auto Image
DHCP/DHCPv6 Local Relay
DHCP Relay Option 60/61/62/125
Flash File System
D-Link Discover Protocol (DDP)
Debug command
Support IPv4/v6 SNTP Server
NTPv3/v4
Password recovery/encryption
DHCP server
• Support for IPv4/IPv6 address assignment
Command Logging
SMTP
DHCPv6 Prefix Delegation (PD)
Ping/ Traceroute for IPv4/IPv6
Microsoft® Network Load Balancing (NLB)
PD Alive (PoE Models Only)
Zero Touch Provisioning (ZTP)